• 看A片,看A片网址,看A片播放器,看A片全程免费
  • 地址:零點立交北蔣家溝工業園
  • 電話:15966604228
  • 聯系人:于洪森
  • 網址:www.hxjzazgc.com
看A片网址当前位置:首页-看A片网址
    風管加工的作業條件怎麽才算合理?
    2018-09-28 15:03:19
    空調風管加工的質量直接關系到人體呼吸空氣的質量,所以濟南空調風管加工必需契合相應的規範.
    The quality of air-conditioning duct processing is directly related to the quality of human breathing air, so Jinan air-conditioning duct processing must conform to the corresponding norms.
    首先,空调风管外观质量应到达折角平直,圆弧平均,两端面平行,无翘角,外表凹凸不大于5 mm;风管与法兰衔接结实,翻边平整,宽度不小于6mm,紧贴法兰;风管法兰孔距应契合空调风管加工的设计请求和施工标准的规则,焊接应结实,焊缝处不设置螺孔,螺孔具备互换性;矩形风管边长大于630mm保温风管大于800mm时应有加固措施,角钢加固筋应排列划一、平均对称固定结实.
    Firstly, the appearance quality of air-conditioning duct should reach a straight bending angle, arc average, two ends parallel, no warping angle, appearance concave and convex not more than 5 mm; air duct and flange joint is strong, flanged flat, width is not less than 6 mm, close to the flange; air duct flange spacing should meet the air-conditioning duct processing design requirements and construction standards of the rules, welding should be solid, weld seam. The screw holes are interchangeable if no screw holes are set at the place. The rectangular air duct should be strengthened when the length of the air duct is larger than 630 mm and the insulation air duct is larger than 800 mm. The angle steel reinforcement bars should be arranged uniformly and symmetrically and stably.
    其次,空調風管加工的劃線辦法可用直角線法.展開辦法采用平行線法.依據大樣圖風管不同的幾何外形和規格,分別劃線展開,並停止剪切.下料後在軋口之前,板材必需倒角.

    Secondly, the method of marking the air duct of air conditioner can be used right angle line method, parallel line method. According to the different geometry shape and specification of the air duct of the large sample drawing, the line is drawn separately and the shearing is stopped. After cutting, the sheet must be chamfered before rolling.

    济南看A片加工

    濟南風管加工工最重要的就是質量控制的過程,除了加工資料、加工工藝等方面外,濟南空調風管加工還有一定的作業條件.
    Jinan air duct processing is the most important quality control process, in addition to processing data, processing technology and other aspects, Jinan air conditioning duct processing also has certain operating conditions.
    1.集中加工應具有寬闊、亮堂、幹淨、空中平整、不濕潤的廠房.
    1. centralized processing should have wide, bright, clean, air leveling, and non wetting workshop.
    2.現場分散加工應具有能防雨雪、大風及構造結實的設備,並能保證現場加工場地規整有序.
    2. On-site dispersed processing should be equipped with rain-proof, snow-proof, strong wind and structurally strong equipment, and can ensure the orderly processing site.
    3.作業地點要有相應加工工藝的根本機具、設備及電源和牢靠的平安防護安裝,並配有消防器材.
    3. Operating place should have the basic equipment, equipment and power supply of corresponding processing technology, and reliable safety protection installation, and equipped with fire fighting equipment.
    4.空調風管加工應有經批准的圖紙、經檢查的大樣圖、系統圖,並有施工員書面的技術質量及平安交底.只要將空調風管加工的各個方面都控制起來.
    4. Air-conditioning duct processing should have approved drawings, large-scale checked drawings, system drawings, and a written technical quality of the construction staff and safe disclosure. As long as all aspects of air-conditioning duct processing are controlled.
    更多的關于济南看A片加工問題或者詳細的內容,請進入看A片,看A片网址,看A片播放器,看A片全程免费公司的網站:網站中會有很多的內容僅供參考。
    For more information on the processing of Jinan ventilation pipes, please visit our company's website: . There will be a lot of content for reference only.
網站首頁 | 公司簡介 | 服務項目 | 看A片网址 | 工程案例 | 服務流程 | 在線留言 | 聯系看A片,看A片网址,看A片播放器,看A片全程免费
版权所有:看A片,看A片网址,看A片播放器,看A片全程免费  手机:15966604228  电话:于洪森  地址:零点立交北蒋家沟工业园
技術支持:濟南網站建設  流量統計:
看A片,看A片网址,看A片播放器,看A片全程免费
XML 地图
看A片,看A片网址,看A片播放器,看A片全程免费